Views:79 Author:Site Editor Publish Time: 2019-12-24 Origin:Site
Cars have become a regular tool of family travel in our daily lives, and many families now own one or more cars. The difficulty of starting a car in winter is usually caused by batteries, because at low temperatures, cars consume significantly more electricity than in other seasons, and battery capacity decreases due to low temperatures. At this time, the automobile emergency starting power supply can help us solve this problem.
1.Pull up the manual brake, place the clutch to the neutral position, check the starter switch, and place the starter switch in the OFF position.
2.Please place the automobile emergency starting power supply on a smooth ground or on a non-moving platform. Be sure to make it away from the engine and belt.
3.Connect the red positive pole clip (+) of the automobile emergency starting power supply to the positive pole of the battery which is out of power. And make sure the connection is strong.
4.Connect the black negative pole clip (-) of the automobile emergency starting power supply to the earthing rod of the car and make sure the connection is strong.
5.Check the correctness and robustness of the connection.
6.Start the car, if the first start-up is not successful, please try the second at an interval of more than 5 seconds.
7.Remove the negative clip and the positive clip after successfully starting the car.
8.After using the automobile emergency starting power supply, charge it.
Please use a dedicated charger to charge the battery. Please charge the battery for 12 hours before you first use it.
The charging steps of Lithium polymer charging:
1.Insert one end of the dedicated charging cable into the charging connection of the automobile emergency starting power supply and confirm that whether the connection is strong.
2.Insert the other end of the charging cable into the socket.
3.At this point, the charging indicator will be lit, indicating that charging is in progress.
4.After charging, the indicator light will be turned off. If the battery voltage meets the requirements, it means that the battery is full.
5.The charging time should not be longer than 24 hours.
The charging steps of Maintenance-free lead-acid battery:
1.The first three steps are the same as the above steps.
2. After the green light of the indicator is on, the charging is complete.
3. For the first time, it is recommended to charge for a long time.
In order to achieve the maximum service life of automobile emergency starting power supply, it is suggested that the power supply should be kept in full state at all times. If the power supply is not kept in full state, the service life of power supply will be shortened. If not using the power supply, please ensure charging and discharging every 3 months.